#[non_exhaustive]pub struct CompleteMultipartUploadInput {Show 18 fields
pub bucket: Option<String>,
pub key: Option<String>,
pub multipart_upload: Option<CompletedMultipartUpload>,
pub upload_id: Option<String>,
pub checksum_crc32: Option<String>,
pub checksum_crc32_c: Option<String>,
pub checksum_crc64_nvme: Option<String>,
pub checksum_sha1: Option<String>,
pub checksum_sha256: Option<String>,
pub checksum_type: Option<ChecksumType>,
pub mpu_object_size: Option<i64>,
pub request_payer: Option<RequestPayer>,
pub expected_bucket_owner: Option<String>,
pub if_match: Option<String>,
pub if_none_match: Option<String>,
pub sse_customer_algorithm: Option<String>,
pub sse_customer_key: Option<String>,
pub sse_customer_key_md5: Option<String>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.bucket: Option<String>Name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts, the destination bucket must be the Outposts access point ARN or the access point alias. For more information about S3 on Outposts, see What is S3 on Outposts? in the Amazon S3 User Guide.
key: Option<String>Object key for which the multipart upload was initiated.
multipart_upload: Option<CompletedMultipartUpload>The container for the multipart upload request information.
upload_id: Option<String>ID for the initiated multipart upload.
checksum_crc32: Option<String>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_crc32_c: Option<String>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_crc64_nvme: Option<String>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the object. The CRC64NVME checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_sha1: Option<String>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 160-bit SHA1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_sha256: Option<String>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 256-bit SHA256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_type: Option<ChecksumType>This header specifies the checksum type of the object, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum that was specified. If the checksum type doesn’t match the checksum type that was specified for the object during the CreateMultipartUpload request, it’ll result in a BadDigest error. For more information, see Checking object integrity in the Amazon S3 User Guide.
mpu_object_size: Option<i64>The expected total object size of the multipart upload request. If there’s a mismatch between the specified object size value and the actual object size value, it results in an HTTP 400 InvalidRequest error.
request_payer: Option<RequestPayer>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
expected_bucket_owner: Option<String>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
if_match: Option<String>Uploads the object only if the ETag (entity tag) value provided during the WRITE operation matches the ETag of the object in S3. If the ETag values do not match, the operation returns a 412 Precondition Failed error.
If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should fetch the object's ETag, re-initiate the multipart upload with CreateMultipartUpload, and re-upload each part.
Expects the ETag value as a string.
For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.
if_none_match: Option<String>Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.
If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.
Expects the '*' (asterisk) character.
For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.
sse_customer_algorithm: Option<String>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sse_customer_key: Option<String>The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sse_customer_key_md5: Option<String>The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
Implementations§
Source§impl CompleteMultipartUploadInput
impl CompleteMultipartUploadInput
Sourcepub fn bucket(&self) -> Option<&str>
pub fn bucket(&self) -> Option<&str>
Name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts, the destination bucket must be the Outposts access point ARN or the access point alias. For more information about S3 on Outposts, see What is S3 on Outposts? in the Amazon S3 User Guide.
Sourcepub fn multipart_upload(&self) -> Option<&CompletedMultipartUpload>
pub fn multipart_upload(&self) -> Option<&CompletedMultipartUpload>
The container for the multipart upload request information.
Sourcepub fn checksum_crc32(&self) -> Option<&str>
pub fn checksum_crc32(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_crc32_c(&self) -> Option<&str>
pub fn checksum_crc32_c(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_crc64_nvme(&self) -> Option<&str>
pub fn checksum_crc64_nvme(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the object. The CRC64NVME checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_sha1(&self) -> Option<&str>
pub fn checksum_sha1(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 160-bit SHA1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_sha256(&self) -> Option<&str>
pub fn checksum_sha256(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 256-bit SHA256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_type(&self) -> Option<&ChecksumType>
pub fn checksum_type(&self) -> Option<&ChecksumType>
This header specifies the checksum type of the object, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum that was specified. If the checksum type doesn’t match the checksum type that was specified for the object during the CreateMultipartUpload request, it’ll result in a BadDigest error. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn mpu_object_size(&self) -> Option<i64>
pub fn mpu_object_size(&self) -> Option<i64>
The expected total object size of the multipart upload request. If there’s a mismatch between the specified object size value and the actual object size value, it results in an HTTP 400 InvalidRequest error.
Sourcepub fn request_payer(&self) -> Option<&RequestPayer>
pub fn request_payer(&self) -> Option<&RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
Sourcepub fn expected_bucket_owner(&self) -> Option<&str>
pub fn expected_bucket_owner(&self) -> Option<&str>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn if_match(&self) -> Option<&str>
pub fn if_match(&self) -> Option<&str>
Uploads the object only if the ETag (entity tag) value provided during the WRITE operation matches the ETag of the object in S3. If the ETag values do not match, the operation returns a 412 Precondition Failed error.
If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should fetch the object's ETag, re-initiate the multipart upload with CreateMultipartUpload, and re-upload each part.
Expects the ETag value as a string.
For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.
Sourcepub fn if_none_match(&self) -> Option<&str>
pub fn if_none_match(&self) -> Option<&str>
Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.
If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.
Expects the '*' (asterisk) character.
For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.
Sourcepub fn sse_customer_algorithm(&self) -> Option<&str>
pub fn sse_customer_algorithm(&self) -> Option<&str>
The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
Sourcepub fn sse_customer_key(&self) -> Option<&str>
pub fn sse_customer_key(&self) -> Option<&str>
The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
Sourcepub fn sse_customer_key_md5(&self) -> Option<&str>
pub fn sse_customer_key_md5(&self) -> Option<&str>
The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
Source§impl CompleteMultipartUploadInput
impl CompleteMultipartUploadInput
Sourcepub fn builder() -> CompleteMultipartUploadInputBuilder
pub fn builder() -> CompleteMultipartUploadInputBuilder
Creates a new builder-style object to manufacture CompleteMultipartUploadInput.
Trait Implementations§
Source§impl Clone for CompleteMultipartUploadInput
impl Clone for CompleteMultipartUploadInput
Source§fn clone(&self) -> CompleteMultipartUploadInput
fn clone(&self) -> CompleteMultipartUploadInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CompleteMultipartUploadInput
impl Debug for CompleteMultipartUploadInput
Source§impl PartialEq for CompleteMultipartUploadInput
impl PartialEq for CompleteMultipartUploadInput
Source§fn eq(&self, other: &CompleteMultipartUploadInput) -> bool
fn eq(&self, other: &CompleteMultipartUploadInput) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for CompleteMultipartUploadInput
Auto Trait Implementations§
impl Freeze for CompleteMultipartUploadInput
impl RefUnwindSafe for CompleteMultipartUploadInput
impl Send for CompleteMultipartUploadInput
impl Sync for CompleteMultipartUploadInput
impl Unpin for CompleteMultipartUploadInput
impl UnwindSafe for CompleteMultipartUploadInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> FmtForward for T
impl<T> FmtForward for T
Source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self to use its Binary implementation when Debug-formatted.Source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self to use its Display implementation when
Debug-formatted.Source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self to use its LowerExp implementation when
Debug-formatted.Source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self to use its LowerHex implementation when
Debug-formatted.Source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self to use its Octal implementation when Debug-formatted.Source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self to use its Pointer implementation when
Debug-formatted.Source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self to use its UpperExp implementation when
Debug-formatted.Source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self to use its UpperHex implementation when
Debug-formatted.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
Source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
Source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
Source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self, then passes self.as_ref() into the pipe function.Source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self, then passes self.as_mut() into the pipe
function.Source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self, then passes self.deref() into the pipe function.Source§impl<T> Tap for T
impl<T> Tap for T
Source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B> of a value. Read moreSource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B> of a value. Read moreSource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R> view of a value. Read moreSource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R> view of a value. Read moreSource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap() only in debug builds, and is erased in release builds.Source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut() only in debug builds, and is erased in release
builds.Source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref() only in debug builds, and is erased in release
builds.Source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut() only in debug builds, and is erased in release
builds.Source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref() only in debug builds, and is erased in release
builds.