Struct CompleteMultipartUploadInputBuilder

#[non_exhaustive]
pub struct CompleteMultipartUploadInputBuilder { /* private fields */ }

A builder for CompleteMultipartUploadInput.

Implementations

impl CompleteMultipartUploadInputBuilder

pub fn bucket(self, input: impl Into<String>) -> Self

Name of the bucket to which the multipart upload was initiated.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts, the destination bucket must be the Outposts access point ARN or the access point alias. For more information about S3 on Outposts, see What is S3 on Outposts? in the Amazon S3 User Guide.

This field is required.

pub fn set_bucket(self, input: Option<String>) -> Self

Name of the bucket to which the multipart upload was initiated.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts, the destination bucket must be the Outposts access point ARN or the access point alias. For more information about S3 on Outposts, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn get_bucket(&self) -> &Option<String>

Name of the bucket to which the multipart upload was initiated.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts, the destination bucket must be the Outposts access point ARN or the access point alias. For more information about S3 on Outposts, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn key(self, input: impl Into<String>) -> Self

Object key for which the multipart upload was initiated.

This field is required.

pub fn set_key(self, input: Option<String>) -> Self

Object key for which the multipart upload was initiated.

pub fn get_key(&self) -> &Option<String>

Object key for which the multipart upload was initiated.

pub fn multipart_upload(self, input: CompletedMultipartUpload) -> Self

The container for the multipart upload request information.

pub fn set_multipart_upload( self, input: Option<CompletedMultipartUpload>, ) -> Self

The container for the multipart upload request information.

pub fn get_multipart_upload(&self) -> &Option<CompletedMultipartUpload>

The container for the multipart upload request information.

pub fn upload_id(self, input: impl Into<String>) -> Self

ID for the initiated multipart upload.

This field is required.

pub fn set_upload_id(self, input: Option<String>) -> Self

ID for the initiated multipart upload.

pub fn get_upload_id(&self) -> &Option<String>

ID for the initiated multipart upload.

pub fn checksum_crc32(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc64_nvme(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the object. The CRC64NVME checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc64_nvme(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the object. The CRC64NVME checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc64_nvme(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the object. The CRC64NVME checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 160-bit SHA1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 160-bit SHA1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 160-bit SHA1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 256-bit SHA256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 256-bit SHA256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 256-bit SHA256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_type(self, input: ChecksumType) -> Self

This header specifies the checksum type of the object, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum that was specified. If the checksum type doesn’t match the checksum type that was specified for the object during the CreateMultipartUpload request, it’ll result in a BadDigest error. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_type(self, input: Option<ChecksumType>) -> Self

This header specifies the checksum type of the object, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum that was specified. If the checksum type doesn’t match the checksum type that was specified for the object during the CreateMultipartUpload request, it’ll result in a BadDigest error. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_type(&self) -> &Option<ChecksumType>

This header specifies the checksum type of the object, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum that was specified. If the checksum type doesn’t match the checksum type that was specified for the object during the CreateMultipartUpload request, it’ll result in a BadDigest error. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn mpu_object_size(self, input: i64) -> Self

The expected total object size of the multipart upload request. If there’s a mismatch between the specified object size value and the actual object size value, it results in an HTTP 400 InvalidRequest error.

pub fn set_mpu_object_size(self, input: Option<i64>) -> Self

The expected total object size of the multipart upload request. If there’s a mismatch between the specified object size value and the actual object size value, it results in an HTTP 400 InvalidRequest error.

pub fn get_mpu_object_size(&self) -> &Option<i64>

The expected total object size of the multipart upload request. If there’s a mismatch between the specified object size value and the actual object size value, it results in an HTTP 400 InvalidRequest error.

pub fn request_payer(self, input: RequestPayer) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_request_payer(&self) -> &Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn if_match(self, input: impl Into<String>) -> Self

Uploads the object only if the ETag (entity tag) value provided during the WRITE operation matches the ETag of the object in S3. If the ETag values do not match, the operation returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should fetch the object's ETag, re-initiate the multipart upload with CreateMultipartUpload, and re-upload each part.

Expects the ETag value as a string.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn set_if_match(self, input: Option<String>) -> Self

Uploads the object only if the ETag (entity tag) value provided during the WRITE operation matches the ETag of the object in S3. If the ETag values do not match, the operation returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should fetch the object's ETag, re-initiate the multipart upload with CreateMultipartUpload, and re-upload each part.

Expects the ETag value as a string.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn get_if_match(&self) -> &Option<String>

Uploads the object only if the ETag (entity tag) value provided during the WRITE operation matches the ETag of the object in S3. If the ETag values do not match, the operation returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should fetch the object's ETag, re-initiate the multipart upload with CreateMultipartUpload, and re-upload each part.

Expects the ETag value as a string.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn if_none_match(self, input: impl Into<String>) -> Self

Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.

Expects the '*' (asterisk) character.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn set_if_none_match(self, input: Option<String>) -> Self

Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.

Expects the '*' (asterisk) character.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn get_if_none_match(&self) -> &Option<String>

Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.

If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.

Expects the '*' (asterisk) character.

For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

pub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self

The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self

The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_sse_customer_algorithm(&self) -> &Option<String>

The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn sse_customer_key(self, input: impl Into<String>) -> Self

The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_sse_customer_key(self, input: Option<String>) -> Self

The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_sse_customer_key(&self) -> &Option<String>

The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self

The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self

The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_sse_customer_key_md5(&self) -> &Option<String>

The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn build(self) -> Result<CompleteMultipartUploadInput, BuildError>

Consumes the builder and constructs a CompleteMultipartUploadInput.

impl CompleteMultipartUploadInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CompleteMultipartUploadOutput, SdkError<CompleteMultipartUploadError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for CompleteMultipartUploadInputBuilder

fn clone(&self) -> CompleteMultipartUploadInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CompleteMultipartUploadInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CompleteMultipartUploadInputBuilder

fn default() -> CompleteMultipartUploadInputBuilder

Returns the “default value” for a type.

impl PartialEq for CompleteMultipartUploadInputBuilder

fn eq(&self, other: &CompleteMultipartUploadInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CompleteMultipartUploadInputBuilder