#[non_exhaustive]pub struct CompleteMultipartUploadOutput {Show 16 fields
pub location: Option<String>,
pub bucket: Option<String>,
pub key: Option<String>,
pub expiration: Option<String>,
pub e_tag: Option<String>,
pub checksum_crc32: Option<String>,
pub checksum_crc32_c: Option<String>,
pub checksum_crc64_nvme: Option<String>,
pub checksum_sha1: Option<String>,
pub checksum_sha256: Option<String>,
pub checksum_type: Option<ChecksumType>,
pub server_side_encryption: Option<ServerSideEncryption>,
pub version_id: Option<String>,
pub ssekms_key_id: Option<String>,
pub bucket_key_enabled: Option<bool>,
pub request_charged: Option<RequestCharged>,
/* private fields */
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.location: Option<String>
The URI that identifies the newly created object.
bucket: Option<String>
The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
key: Option<String>
The object key of the newly created object.
expiration: Option<String>
If the object expiration is configured, this will contain the expiration date (expiry-date
) and rule ID (rule-id
). The value of rule-id
is URL-encoded.
This functionality is not supported for directory buckets.
e_tag: Option<String>
Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
checksum_crc32: Option<String>
The Base64 encoded, 32-bit CRC32 checksum
of the object. This checksum is only be present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
checksum_crc32_c: Option<String>
The Base64 encoded, 32-bit CRC32C
checksum of the object. This checksum is only present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
checksum_crc64_nvme: Option<String>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME
checksum of the object. The CRC64NVME
checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.
checksum_sha1: Option<String>
The Base64 encoded, 160-bit SHA1
digest of the object. This will only be present if the object was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
checksum_sha256: Option<String>
The Base64 encoded, 256-bit SHA256
digest of the object. This will only be present if the object was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
checksum_type: Option<ChecksumType>
The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum type that was specified during the CreateMultipartUpload
request. For more information, see Checking object integrity in the Amazon S3 User Guide.
server_side_encryption: Option<ServerSideEncryption>
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256
, aws:kms
).
version_id: Option<String>
Version ID of the newly created object, in case the bucket has versioning turned on.
This functionality is not supported for directory buckets.
ssekms_key_id: Option<String>
If present, indicates the ID of the KMS key that was used for object encryption.
bucket_key_enabled: Option<bool>
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
request_charged: Option<RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
Implementations§
Source§impl CompleteMultipartUploadOutput
impl CompleteMultipartUploadOutput
Sourcepub fn bucket(&self) -> Option<&str>
pub fn bucket(&self) -> Option<&str>
The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
Sourcepub fn expiration(&self) -> Option<&str>
pub fn expiration(&self) -> Option<&str>
If the object expiration is configured, this will contain the expiration date (expiry-date
) and rule ID (rule-id
). The value of rule-id
is URL-encoded.
This functionality is not supported for directory buckets.
Sourcepub fn e_tag(&self) -> Option<&str>
pub fn e_tag(&self) -> Option<&str>
Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_crc32(&self) -> Option<&str>
pub fn checksum_crc32(&self) -> Option<&str>
The Base64 encoded, 32-bit CRC32 checksum
of the object. This checksum is only be present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_crc32_c(&self) -> Option<&str>
pub fn checksum_crc32_c(&self) -> Option<&str>
The Base64 encoded, 32-bit CRC32C
checksum of the object. This checksum is only present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_crc64_nvme(&self) -> Option<&str>
pub fn checksum_crc64_nvme(&self) -> Option<&str>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME
checksum of the object. The CRC64NVME
checksum is always a full object checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_sha1(&self) -> Option<&str>
pub fn checksum_sha1(&self) -> Option<&str>
The Base64 encoded, 160-bit SHA1
digest of the object. This will only be present if the object was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_sha256(&self) -> Option<&str>
pub fn checksum_sha256(&self) -> Option<&str>
The Base64 encoded, 256-bit SHA256
digest of the object. This will only be present if the object was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn checksum_type(&self) -> Option<&ChecksumType>
pub fn checksum_type(&self) -> Option<&ChecksumType>
The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header as a data integrity check to verify that the checksum type that is received is the same checksum type that was specified during the CreateMultipartUpload
request. For more information, see Checking object integrity in the Amazon S3 User Guide.
Sourcepub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256
, aws:kms
).
Sourcepub fn version_id(&self) -> Option<&str>
pub fn version_id(&self) -> Option<&str>
Version ID of the newly created object, in case the bucket has versioning turned on.
This functionality is not supported for directory buckets.
Sourcepub fn ssekms_key_id(&self) -> Option<&str>
pub fn ssekms_key_id(&self) -> Option<&str>
If present, indicates the ID of the KMS key that was used for object encryption.
Sourcepub fn bucket_key_enabled(&self) -> Option<bool>
pub fn bucket_key_enabled(&self) -> Option<bool>
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
Sourcepub fn request_charged(&self) -> Option<&RequestCharged>
pub fn request_charged(&self) -> Option<&RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
Source§impl CompleteMultipartUploadOutput
impl CompleteMultipartUploadOutput
Sourcepub fn builder() -> CompleteMultipartUploadOutputBuilder
pub fn builder() -> CompleteMultipartUploadOutputBuilder
Creates a new builder-style object to manufacture CompleteMultipartUploadOutput
.
Trait Implementations§
Source§impl Clone for CompleteMultipartUploadOutput
impl Clone for CompleteMultipartUploadOutput
Source§fn clone(&self) -> CompleteMultipartUploadOutput
fn clone(&self) -> CompleteMultipartUploadOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for CompleteMultipartUploadOutput
impl PartialEq for CompleteMultipartUploadOutput
Source§fn eq(&self, other: &CompleteMultipartUploadOutput) -> bool
fn eq(&self, other: &CompleteMultipartUploadOutput) -> bool
self
and other
values to be equal, and is used by ==
.Source§impl RequestId for CompleteMultipartUploadOutput
impl RequestId for CompleteMultipartUploadOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.Source§impl RequestIdExt for CompleteMultipartUploadOutput
impl RequestIdExt for CompleteMultipartUploadOutput
Source§fn extended_request_id(&self) -> Option<&str>
fn extended_request_id(&self) -> Option<&str>
impl StructuralPartialEq for CompleteMultipartUploadOutput
Auto Trait Implementations§
impl Freeze for CompleteMultipartUploadOutput
impl RefUnwindSafe for CompleteMultipartUploadOutput
impl Send for CompleteMultipartUploadOutput
impl Sync for CompleteMultipartUploadOutput
impl Unpin for CompleteMultipartUploadOutput
impl UnwindSafe for CompleteMultipartUploadOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)Source§impl<T> FmtForward for T
impl<T> FmtForward for T
Source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.Source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.Source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.Source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.Source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.Source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.Source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.Source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
Source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moreSource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moreSource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
Source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
Source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.Source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.Source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.Source§impl<T> Tap for T
impl<T> Tap for T
Source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read moreSource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read moreSource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read moreSource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read moreSource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read moreSource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read moreSource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.Source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.Source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.Source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.