#[non_exhaustive]pub struct CreateTokenInput {
pub client_id: Option<String>,
pub client_secret: Option<String>,
pub grant_type: Option<String>,
pub device_code: Option<String>,
pub code: Option<String>,
pub refresh_token: Option<String>,
pub scope: Option<Vec<String>>,
pub redirect_uri: Option<String>,
pub code_verifier: Option<String>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.client_id: Option<String>
The unique identifier string for the client or application. This value comes from the result of the RegisterClient
API.
client_secret: Option<String>
A secret string generated for the client. This value should come from the persisted result of the RegisterClient
API.
grant_type: Option<String>
Supports the following OAuth grant types: Authorization Code, Device Code, and Refresh Token. Specify one of the following values, depending on the grant type that you want:
* Authorization Code - authorization_code
* Device Code - urn:ietf:params:oauth:grant-type:device_code
* Refresh Token - refresh_token
device_code: Option<String>
Used only when calling this API for the Device Code grant type. This short-lived code is used to identify this authorization request. This comes from the result of the StartDeviceAuthorization
API.
code: Option<String>
Used only when calling this API for the Authorization Code grant type. The short-lived code is used to identify this authorization request.
refresh_token: Option<String>
Used only when calling this API for the Refresh Token grant type. This token is used to refresh short-lived tokens, such as the access token, that might expire.
For more information about the features and limitations of the current IAM Identity Center OIDC implementation, see Considerations for Using this Guide in the IAM Identity Center OIDC API Reference.
scope: Option<Vec<String>>
The list of scopes for which authorization is requested. The access token that is issued is limited to the scopes that are granted. If this value is not specified, IAM Identity Center authorizes all scopes that are configured for the client during the call to RegisterClient
.
redirect_uri: Option<String>
Used only when calling this API for the Authorization Code grant type. This value specifies the location of the client or application that has registered to receive the authorization code.
code_verifier: Option<String>
Used only when calling this API for the Authorization Code grant type. This value is generated by the client and presented to validate the original code challenge value the client passed at authorization time.
Implementations§
Source§impl CreateTokenInput
impl CreateTokenInput
Sourcepub fn client_id(&self) -> Option<&str>
pub fn client_id(&self) -> Option<&str>
The unique identifier string for the client or application. This value comes from the result of the RegisterClient
API.
Sourcepub fn client_secret(&self) -> Option<&str>
pub fn client_secret(&self) -> Option<&str>
A secret string generated for the client. This value should come from the persisted result of the RegisterClient
API.
Sourcepub fn grant_type(&self) -> Option<&str>
pub fn grant_type(&self) -> Option<&str>
Supports the following OAuth grant types: Authorization Code, Device Code, and Refresh Token. Specify one of the following values, depending on the grant type that you want:
* Authorization Code - authorization_code
* Device Code - urn:ietf:params:oauth:grant-type:device_code
* Refresh Token - refresh_token
Sourcepub fn device_code(&self) -> Option<&str>
pub fn device_code(&self) -> Option<&str>
Used only when calling this API for the Device Code grant type. This short-lived code is used to identify this authorization request. This comes from the result of the StartDeviceAuthorization
API.
Sourcepub fn code(&self) -> Option<&str>
pub fn code(&self) -> Option<&str>
Used only when calling this API for the Authorization Code grant type. The short-lived code is used to identify this authorization request.
Sourcepub fn refresh_token(&self) -> Option<&str>
pub fn refresh_token(&self) -> Option<&str>
Used only when calling this API for the Refresh Token grant type. This token is used to refresh short-lived tokens, such as the access token, that might expire.
For more information about the features and limitations of the current IAM Identity Center OIDC implementation, see Considerations for Using this Guide in the IAM Identity Center OIDC API Reference.
Sourcepub fn scope(&self) -> &[String]
pub fn scope(&self) -> &[String]
The list of scopes for which authorization is requested. The access token that is issued is limited to the scopes that are granted. If this value is not specified, IAM Identity Center authorizes all scopes that are configured for the client during the call to RegisterClient
.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .scope.is_none()
.
Sourcepub fn redirect_uri(&self) -> Option<&str>
pub fn redirect_uri(&self) -> Option<&str>
Used only when calling this API for the Authorization Code grant type. This value specifies the location of the client or application that has registered to receive the authorization code.
Sourcepub fn code_verifier(&self) -> Option<&str>
pub fn code_verifier(&self) -> Option<&str>
Used only when calling this API for the Authorization Code grant type. This value is generated by the client and presented to validate the original code challenge value the client passed at authorization time.
Source§impl CreateTokenInput
impl CreateTokenInput
Sourcepub fn builder() -> CreateTokenInputBuilder
pub fn builder() -> CreateTokenInputBuilder
Creates a new builder-style object to manufacture CreateTokenInput
.
Trait Implementations§
Source§impl Clone for CreateTokenInput
impl Clone for CreateTokenInput
Source§fn clone(&self) -> CreateTokenInput
fn clone(&self) -> CreateTokenInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for CreateTokenInput
impl Debug for CreateTokenInput
Source§impl PartialEq for CreateTokenInput
impl PartialEq for CreateTokenInput
impl StructuralPartialEq for CreateTokenInput
Auto Trait Implementations§
impl Freeze for CreateTokenInput
impl RefUnwindSafe for CreateTokenInput
impl Send for CreateTokenInput
impl Sync for CreateTokenInput
impl Unpin for CreateTokenInput
impl UnwindSafe for CreateTokenInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)Source§impl<T> FmtForward for T
impl<T> FmtForward for T
Source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.Source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.Source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.Source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.Source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.Source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.Source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.Source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
Source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moreSource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moreSource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
Source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
Source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.Source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.Source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.Source§impl<T> Tap for T
impl<T> Tap for T
Source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read moreSource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read moreSource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read moreSource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read moreSource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read moreSource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read moreSource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.Source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.Source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.Source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.Source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.