Struct UploadPartOutputBuilder

#[non_exhaustive]
pub struct UploadPartOutputBuilder { /* private fields */ }

A builder for UploadPartOutput.

Implementations

impl UploadPartOutputBuilder

pub fn server_side_encryption(self, input: ServerSideEncryption) -> Self

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

pub fn set_server_side_encryption( self, input: Option<ServerSideEncryption>, ) -> Self

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

pub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

pub fn e_tag(self, input: impl Into<String>) -> Self

Entity tag for the uploaded object.

pub fn set_e_tag(self, input: Option<String>) -> Self

Entity tag for the uploaded object.

pub fn get_e_tag(&self) -> &Option<String>

Entity tag for the uploaded object.

pub fn checksum_crc32(self, input: impl Into<String>) -> Self

The Base64 encoded, 32-bit CRC32 checksum of the object. This checksum is only be present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32(self, input: Option<String>) -> Self

The Base64 encoded, 32-bit CRC32 checksum of the object. This checksum is only be present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

The Base64 encoded, 32-bit CRC32 checksum of the object. This checksum is only be present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c(self, input: impl Into<String>) -> Self

The Base64 encoded, 32-bit CRC32C checksum of the object. This checksum is only present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c(self, input: Option<String>) -> Self

The Base64 encoded, 32-bit CRC32C checksum of the object. This checksum is only present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

The Base64 encoded, 32-bit CRC32C checksum of the object. This checksum is only present if the checksum was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc64_nvme(self, input: impl Into<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the part. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc64_nvme(self, input: Option<String>) -> Self

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the part. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc64_nvme(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the Base64 encoded, 64-bit CRC64NVME checksum of the part. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(self, input: impl Into<String>) -> Self

The Base64 encoded, 160-bit SHA1 digest of the object. This will only be present if the object was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1(self, input: Option<String>) -> Self

The Base64 encoded, 160-bit SHA1 digest of the object. This will only be present if the object was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

The Base64 encoded, 160-bit SHA1 digest of the object. This will only be present if the object was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256(self, input: impl Into<String>) -> Self

The Base64 encoded, 256-bit SHA256 digest of the object. This will only be present if the object was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256(self, input: Option<String>) -> Self

The Base64 encoded, 256-bit SHA256 digest of the object. This will only be present if the object was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

The Base64 encoded, 256-bit SHA256 digest of the object. This will only be present if the object was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.

This functionality is not supported for directory buckets.

pub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.

This functionality is not supported for directory buckets.

pub fn get_sse_customer_algorithm(&self) -> &Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.

This functionality is not supported for directory buckets.

pub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

This functionality is not supported for directory buckets.

pub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

This functionality is not supported for directory buckets.

pub fn get_sse_customer_key_md5(&self) -> &Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

This functionality is not supported for directory buckets.

pub fn ssekms_key_id(self, input: impl Into<String>) -> Self

If present, indicates the ID of the KMS key that was used for object encryption.

pub fn set_ssekms_key_id(self, input: Option<String>) -> Self

If present, indicates the ID of the KMS key that was used for object encryption.

pub fn get_ssekms_key_id(&self) -> &Option<String>

If present, indicates the ID of the KMS key that was used for object encryption.

pub fn bucket_key_enabled(self, input: bool) -> Self

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn set_bucket_key_enabled(self, input: Option<bool>) -> Self

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn get_bucket_key_enabled(&self) -> &Option<bool>

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn request_charged(self, input: RequestCharged) -> Self

If present, indicates that the requester was successfully charged for the request.

This functionality is not supported for directory buckets.

pub fn set_request_charged(self, input: Option<RequestCharged>) -> Self

If present, indicates that the requester was successfully charged for the request.

This functionality is not supported for directory buckets.

pub fn get_request_charged(&self) -> &Option<RequestCharged>

If present, indicates that the requester was successfully charged for the request.

This functionality is not supported for directory buckets.

pub fn build(self) -> UploadPartOutput

Consumes the builder and constructs a UploadPartOutput.

Trait Implementations

impl Clone for UploadPartOutputBuilder

fn clone(&self) -> UploadPartOutputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UploadPartOutputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for UploadPartOutputBuilder

fn default() -> UploadPartOutputBuilder

Returns the “default value” for a type.

impl PartialEq for UploadPartOutputBuilder

fn eq(&self, other: &UploadPartOutputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for UploadPartOutputBuilder